|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Description The 74LVC1G11 is a single 3-input positive AND gate with a standard totem pole output. The device is designed for Pin Assignments operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF NEW PRODUCT circuitry disables the output preventing damaging current backflow when the device is powered down. The gate performs the positive Boolean function: Y = A *B*C or Y = A +B+C Features * * * * * * Wide Supply Voltage Range from 1.65V to 5.5V 24mA Output Drive at 3.3V CMOS low power consumption IOFF Supports Partial-Power-Down Mode Operation Inputs accept up to 5.5V ESD Protection Exceeds JESD 22 o o * * * * 200-V Machine Model (A115-A) 2000-V Human Body Model (A114-A) Applications * * * * Voltage Level Shifting General Purpose Logic Power Down Signal Isolation Wide array of products such as: o o o o o PCs, networking, notebooks, netbooks, PDAs Computer peripherals, hard drives, CD/DVD ROM TV, DVD, DVR, set top box Cell Phones, Personal Navigation / GPS MP3 players ,Cameras, Video Recorders Latch-Up Exceeds 100mA per JESD 78, Class II Range of Package Options SOT26, SOT363, and DFN1010: Available in "Green" Molding Compound (no Br, Sb) Lead Free Finish/ RoHS Compliant (Note 1) Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html. 74LVC1G11 Document number: DS35122 Rev. 1 - 2 1 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Pin Descriptions Pin Name A GND B Y Vcc C Data Input Ground Data Input Data Output Supply Voltage Data Input Description NEW PRODUCT Logic Diagram 1 3 6 4 Y A B C Function Table Inputs B H X L X Output Y H L L L A H L X X C H X X L Absolute Maximum Ratings (Note 2) Symbol ESD HBM ESD MM VCC VI Vo Vo IIK IOK IO TJ TSTG Notes: Description Human Body Model ESD Protection Machine Model ESD Protection Supply Voltage Range Input Voltage Range Voltage applied to output in high impedance or IOFF state Voltage applied to output in high or low state Input Clamp Current VI<0 Output Clamp Current Continuous output current Continuous current through Vdd or GND Operating Junction Temperature Storage Temperature Rating 2 200 -0.5 to 6.5 -0.5 to 6.5 -0.5 to 6.5 -0.3 to VCC +0.5 -50 -50 50 100 -40 to 150 -65 to 150 Unit KV V V V V V mA mA mA mA C C 2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 74LVC1G11 Document number: DS35122 Rev. 1 - 2 2 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Recommended Operating Conditions (Note 3) Symbol VCC Operating Voltage Parameter Operating Data retention only VCC = 1.65 V to 1.95 V VIH High-level Input Voltage VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V VCC = 1.65 V to 1.95 V VIL Low-level input voltage VCC = 2.3 V to 2.7 V VCC = 3 V to 3.6 V VCC = 4.5 V to 5.5 V VI VO Input Voltage Output Voltage VCC = 1.65 V VCC = 2.3 V IOH High-level output current VCC = 3 V VCC = 4.5 V VCC = 1.65 V VCC = 2.3 V IOL Low-level output current VCC = 3 V VCC = 4.5 V VCC = 1.8 V 0.15V, 2.5 V 0.2 V t/V Input transition rise or fall rate Operating free-air temperature VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V TA Notes: Min 1.65 1.5 0.65 X VCC 1.7 2 0.7 X VCC Max 5.5 Unit V V V NEW PRODUCT 0.35 X VCC 0.7 0.8 0.3 X VCC 0 0 5.5 VCC -4 -8 -16 -24 -32 4 8 16 24 32 20 10 5 -40 125 C ns/V mA mA V V V 3. Unused inputs should be held at Vcc or Ground. 74LVC1G11 Document number: DS35122 Rev. 1 - 2 3 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Electrical Characteristics Symbol Parameter TA=-40 C to 85 C Test Conditions IOH = -100A IOH = -4mA (All typical values are at Vcc = 3.3V, TA = 25C) Vcc 1.65V to 5.5V 1.65V 2.3V 3V 4.5V 1.65V to 5.5V 1.65V 2.3V 3V 4.5V 0 to 5.5V 0 1.65V to 5.5V 3 V to 5.5V Min VCC - 0.1 1.2 1.9 2.4 2.3 3.8 0.1 0.45 0.3 0.4 0.55 0.55 5 10 10 500 A A A A V V Typ. Max Unit VOH High Level Output Voltage IOH = -8mA IOH = -16mA IOH = -24mA NEW PRODUCT IOH = -32mA IOL = 100A IOL = 4mA VOL High-level Input Voltage IOL = 8mA IOL = 16mA IOL = 24mA IOL = 32mA II IOFF ICC ICC Input Current Power Down Leakage Current Supply Current Additional Supply Current VI = 5.5 V or GND VI or VO = 5.5V VI = 5.5V of GND IO=0 Input at VCC -0.6 V 74LVC1G11 Document number: DS35122 Rev. 1 - 2 4 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Electrical Characteristics Symbol Parameter TA=-40 C to 125 C Test Conditions (All typical values are at Vcc = 3.3V, TA = 25C) Vcc 1.65V to 5.5V 1.65V 2.3V 3V 4.5V 1.65V to 5.5V 1.65V 2.3V 3V 4.5V 0 to 5.5V 0 1.65V to 5.5V 3 V to 5.5V 3.3 (Note 4) 4 166 333 231 46 102 TBD Min VCC - 0.1 0.95 1.7 1.9 2.0 3.4 0.1 0.70 0.45 0.60 0.80 0.80 20 20 40 5000 Typ. Max Unit VOH VOL II IOFF ICC ICC Ci JA JC Notes: IOH = -100A IOH = -4mA IOH = -8mA High Level Output Voltage IOH = -16mA IOH = -24mA IOH = -32mA IOL = 100A IOL = 4mA IOL = 8mA High-level Input Voltage IOL = 16mA IOL = 24mA IOL = 32mA Input Current VI = 5.5 V or GND VI or VO = 5.5V Power Down Leakage Current VI = 5.5V of GND Supply Current IO=0 Additional Supply Input at VCC -0.6 V Current Input Capacitance Vi = VCC - or GND SOT26 Thermal Resistance SOT363 Junction-to-Ambient DFN1010 SOT26 Thermal Resistance SOT363 Junction-to-Case DFN1010 V NEW PRODUCT V A A A A pF o C/W (Note 4) o C/W 4. Test condition for SOT26, SOT363 and DFN1010 : Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. 74LVC1G11 Document number: DS35122 Rev. 1 - 2 5 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Switching Characteristics TA=-40 C to 85 C , CL = 15pF (see Figure 1) Parameter tpd From (Input) Any TO (OUTPUT) Y Vcc = 1.8 V 0.15V Min Max 1.0 15.2 Vcc = 2.5 V 0.2V Min Max 0.7 5.6 Vcc = 3.3 V 0.3V Min Max 0.7 4.1 Vcc = 5 V 0.5V Min Max 0.7 3.1 Unit ns NEW PRODUCT TA=-40 C to 85 C , CL = 30 or 50pF (see Figure 2) Vcc = 1.8 V From TO 0.15V Parameter (Input) (OUTPUT) Min Max tpd Any Y 1.0 17.2 Vcc = 2.5 V 0.2V Min Max 0.7 6.2 Vcc = 3.3 V 0.3V Min Max 0.7 4.9 Vcc = 5 V 0.5V Min Max 0.7 3.5 Unit ns TA=-40 C to 125 C , CL = 15 pF (see Figure 1) Parameter tpd From (Input) Any TO (OUTPUT) Y Vcc = 1.8 V 0.15V Min 1.0 Max 18.3 Vcc = 2.5 V 0.2V Min Max 0.7 6.7 Vcc = 3.3 V 0.3V Min 0.7 Max 4.9 Vcc = 5 V 0.5V Min Max 0.7 3.7 Unit ns TA=-40 C to 125 C , CL = 30 or 50pF (see Figure 2) Vcc = 1.8 V From TO 0.15V Parameter (Input) (OUTPUT) Min Max tpd Any Y 1.0 20.7 Vcc = 2.5 V 0.2V Min Max 0.7 7.5 Vcc = 3.3 V 0.3V Min Max 0.7 5.9 Vcc = 5 V 0.5V Min Max 0.7 4.2 Unit ns Operating Characteristics TA = 25 C Parameter Cpd Power dissipation capacitance Test Conditions f = 10 MHz Vcc = 1.8 V TYP 17 Vcc = 2.5 V TYP 18 Vcc = 3.3 V TYP 19 Vcc = 5 V TYP 22 Unit pF 74LVC1G11 Document number: DS35122 Rev. 1 - 2 6 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Parameter Measurement Information NEW PRODUCT Vcc 1.8V0.15V 2.5V0.2V 3.3V0.3V 5V0.5V Inputs VI VCC VCC 3V VCC tr/tf 2ns 2ns 2.5ns 2.5ns VM VCC/2 VCC/2 1.5V VCC/2 CL 15pF 15pF 15pF 15pF RL 1M 1M 1M 1M Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A. B. C. D. Includes test lead and test apparatus capacitance. All pulses are supplied at pulse repetition rate 10 MHz Inputs are measured separately one transition per measurement tPLH and tPHL are the same as tPD Figure 1. Load Circuit and Voltage Waveforms 74LVC1G11 Document number: DS35122 Rev. 1 - 2 7 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Parameter Measurement Information (Continued) NEW PRODUCT Vcc 1.8V0.15V 2.5V0.2V 3.3V0.3V 5V0.5V Inputs VI VCC VCC 3V VCC tr/tf 2ns 2ns 2.5ns 2.5ns VM VCC/2 VCC/2 1.5V VCC/2 CL 30pF 30pF 50pF 50pF RL 1K 500 500 500 Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Notes: A. B. C. D. Includes test lead and test apparatus capacitance. All pulses are supplied at pulse repetition rate 10 MHz Inputs are measured separately one transition per measurement tPLH and tPHL are the same as tPD Figure 2. Load Circuit and Voltage Waveforms 74LVC1G11 Document number: DS35122 Rev. 1 - 2 8 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Ordering Information NEW PRODUCT Device 74LVC1G11W6-7 74LVC1G11DW-7 74LVC1G11FW4-7 Notes: Package Code W6 DW FW4 Packaging (Note 7) SOT26 SOT363 DFN1010 7" Tape and Reel Quantity 3000/Tape & Reel 3000/Tape & Reel 5000/Tape & Reel Part Number Suffix -7 -7 -7 7. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Marking Information (1) SOT26, SOT363 Part Number 74LVC1G11W6 74LVC1G11DW Package SOT26 SOT363 Identification Code TV TV 74LVC1G11 Document number: DS35122 Rev. 1 - 2 9 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Marking Information (Continued) (2) DFN1010 NEW PRODUCT Part Number 74LVC1G11FW4 Package DFN1010 Identification Code TV Package Outline Dimensions (All Dimensions in mm) (1) Package Type: SOT26 74LVC1G11 Document number: DS35122 Rev. 1 - 2 10 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Package Outline Dimensions (All Dimensions in mm) (Continued) (2) Package Type: SOT363 C L 0.10/0.30 C L 4x-0.65 1.15/1.35 C L C L 2.0/2.2 6x-0.42 6x-0.60 NEW PRODUCT PIN 1 0.40/0.45 0.65Bsc. Land Pattern Recommendation (unit:mm) C L 1.10Max. 0.9/1.0 0.1/0.22 "A" 0/0.1 1.8/2.2 Detail"A" Gauge Plane (3) Package Type: DFN1010 0.13Typ. 0.05 C 6x0.08 C 0.40Max. 0/8 0.25/0.40 0.25 0/0.05 Side View 0.08 C C 0.20(6x) 2X- 0.235 0.95/1.05 0.15Min. A 0.15 B 0.05/0.15 0.35Typ. Pin1 0.15Min. Pin1 0.35Typ. 0.95/1.05 Land Pattern Recommendation (unit:mm) Top View 2x- 0.08 C 0.35/0.45(6x) 0.07Typ. 0.14/0.20(6x) 0.07 CAB Bottom View 74LVC1G11 Document number: DS35122 Rev. 1 - 2 11 of 13 www.diodes.com 0.45(6x) Seating Plane 1.9 January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE Taping Orientation (Note 8) For DFN1010 NEW PRODUCT Notes: 8. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf 74LVC1G11 Document number: DS35122 Rev. 1 - 2 12 of 13 www.diodes.com January 2011 (c) Diodes Incorporated 74LVC1G11 SINGLE 3 INPUT POSITIVE AND GATE IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. NEW PRODUCT Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com 74LVC1G11 Document number: DS35122 Rev. 1 - 2 13 of 13 www.diodes.com January 2011 (c) Diodes Incorporated |
Price & Availability of 74LVC1G11W6 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |